These taps are used to tap M14x2.0 threads into an appropriate sized hole. The theoretical "proper" size hole for an M14x2.0 tap is 12mm (0.472"). We recommend a 15/32 drilled hole for use with this tap.
These taps are most frequently used to tap one of the caliper mounting holes on a DSM knuckle when upgrading the front brakes with the EVO 5-9 (Brembo) Front Brake Upgrade. As it happens, the caliper mounting holes on the knuckle of a DSM are just slightly larger than 12mm. This is perfectly acceptable.
We only have the economy version of these taps remaining.
|