These fittings have one end -AN male and the other end is what is known as -AN straight cut or -AN o-ring, or ORB. An explanation of this style of fitting is a bit involved, but here goes: Most references to -AN usually refer to the most common style of -AN: a fitting which seals on a 37-degree cone-shaped seat. There is another style of -AN. One that does not have a cone-shaped seat and thus cannot seal on it. Instead, this style of fitting seals with an o-ring (or sometimes crush washer) located at the top-end of the threads.
The ends are at a straight orientation to each other. Made of aluminum with an anodized finish. Include sealing o-ring.
NOTE: By far, the most common example of where this style of adapter is used is the inlet/outlet ports of such things as fuel pressure regulators and the like. These ports (which are female thread -AN) are generally referred to as "-AN ports".
NOTE: Photo is for display purposes and depicts a variety of available fittings. Be assured that your order will correspond to your selections in the drop-downs. All fittings in drop-down not necessarily in photo.
Sold individually.
Available in several sizes & colours.
Choose from drop-downs below:
|