Rear Wheel Bearing Assembly: 2g DSM/EVO 4-9

This is the wheel bearing assembly only. It includes the bearing housing that is bolted to the rear knuckle, but it DOES NOT include the wheel hub. You'll need to remove your existing hub and press it into this bearing assembly. Any shop with a bearing press can handle that procedure, no problems. Left and right sides use the same part.

New OEM bearing/hub assembly to knuckle mounting bolts (MB844529) are available as an option.  It should be noted that these bolts are used only for 2g DSM only.  Different bolts are used for EVO 4-9.

NOTE: Photo is for display purposes and depicts a single bearing assembly with optional OEM knuckle mounting bolts.  Be assured that your order will correspond to your selections in the drop-downs.

NOTE: For the record, Mitsu claims the OEM rear bearing/hub assembly can't be disassembled. They're correct that the BEARING portion is unserviceable (since the act of removing the hub portion generally destroys the bearing seals which aren't available separately), but the hub portion is removed without issue. Likewise, the reverse procedure (pressing the hub into the bearing assembly) is easily done without issue as long as the correct procedure is used (proper press, parts held firmly and correctly, etc).

Applications:
DSM (1995-99) AWD.
EVO (IV-IX).

Several purchase options available.
Choose from drop-downs below: