Outlander Front Brake Calipers: DSM/EVO 1-3

These are the calipers that come stock on the Mitsubishi Outlander. The Outlander uses the exact same dual-piston caliper found on 2g DSM AWD, but it uses a caliper bracket that spaces the caliper 10mm further from the centre of the hub. 

These are professionally remanufactured calipers with every component except the bare casting replaced with new (pistons, seals, bleeders, pins, hardware, etc). These are complete caliper assemblies: they include the hydraulic portion of the caliper and the bracket that attaches the caliper assembly to the vehicle. The fact that the brackets are included is especially important to DSMers who are using these as a "big brake" upgrade since the smaller DSM brakes have a different bracket. There is NO core charge associated with these calipers.

NOTE: It should be noted that these calipers use a banjo port for the brake line and this is NOT compatible with the stock 1g DSM brake lines.  In order to install these calipers on a 1g DSM you'll need brake lines compatible with these calipers, such as our "TechnaFit SS-Braided Lines for Outlander Front Big Brakes: 1g DSM".  For details, please refer to the "Related products" section near the bottom of the page.

Applications:
DSM (1990-99).
We only have one single right hand (passenger side) caliper remaining!