OEM Rear Lower Control Arm Bushings: 2g DSM

Genuine OEM parts.

These are the bushings found on the inboard end of the rear lower control arm. The inboard end is the one that attaches to the subframe.

The bushing is comprised of a rubber bushing with an outer metal sleeve and an inner metal sleeve integrated into the rubber. To install this into your control arm, the old bushing is removed and the entire bushing assembly is pressed into place.

The entire lower control arm (MR131754) has been discontinued by Mitsu and is no longer available.  However, replacement of this bushing (and the outboard bushing, located in the knuckle) can usually restore the lower control arm to "good as new" function.  A little rust removal and refinishing of the control arm itself can generally restore the control arm to true "good as new" condition.

For your convenience, the OEM fasteners associated with lower control arm is available to be purchased as an option.

Application: DSM (1995-99).

Several purchase options available.
Choose from drop-downs below: