RTM Rear Camber Kit: 2g DSM

This kit is used to adjust the rear camber on your 2g DSM.

The kit includes washers that are used to shim the upper rear arm where it attaches to the body. Several washers are included with the kit and are used to increase the "gap" between the upper arm and its attachment point. This reduces the amount of negative camber. The number of washers used is dependant on the amount of camber adjustment required.

Each kit includes components for an entire vehicle and includes: 

• 8 top-quality grade 10.9 bolts (which are very strong)
• 8 lock washers
• 48 flat washers (6 per bolt) which are used to shim the upper arm

This kit is probably the most inexpensive method of adjusting the rear camber on a 2g.

NOTE: This kit is generally used after lowering the ride height of a vehicle (with lowering springs for example). Lowering the ride height tends to either decrease the +ve camber or increase the -ve. This kit is generally used to adjust the camber back to specs by reversing the above tendancies. That is, by reducing the amount of -ve camber or increasing the +ve. In short, it can only add +ve camber, NOT -ve.

Application: DSM (1995-99).